Why An Anti-Skid Marine Surface?

An anti-skid material or surface is constructed in a way that it prevents skidding or slipping. The Marine industry faces so many risky conditions both at the sea and shores. That is why the crew and passengers have to be protected through certain measures. There are many ways of preventing any accidents like using non-slippery materials on some parts. There is a range of anti-slip materials that can be used.
This article will provide you with all the details about the anti-slip materials, the areas you should consider having them and why you should use them.

Slips and Trips 

So many people trip or slip around the marine areas resulting to some fatal injuries. Some of the most dangerous areas include any wet surfaces, poorly fitted ropes, cables and loaded areas. For the constructors use of steel or metals is discouraged because they are prone to damage especially due to rust.

The Laws That Apply 

Several laws state some things related to marine safety and security like Health, Safety and Welfare-regulations 1992, Docks regulations year 1988 and Loading and Unloading of Fishing Vessels-regulations 1988.

The Areas to Be Covered with anti-skid 

For maritime safety, there should be a non-slip floor to ensure there are no accidents for the users.

Bridges
The most used area in the marine is a bridge because it is the interconnection between many parts of the marine. Glass Reinforced Plastic is the best because it has the ability to endure advance weather or conditions like wind, rain, and even salty water. Some materials like metal will wear out so fast thus increasing the chances of accidents. The slip resistant fibre glass is the most appropriate material to use for safety in ports.

Harbours 
Harbours are among the busiest places around the marine with workers, managers and a number of operations going on. Fibre grating products are the best materials for safety of the people around the harbour. They are made of Glass Reinforced Plastic which does not need a lot of maintenance and are very strong. This material gives total safety and security for harbour managers, users, those visiting and workers. In case you never installed this product during the first construction, you can always look for renovation experts.

Docks 
Majority of the accidents reported in docks are caused by slipping or tripping. This can have some serious impacts on the person like dislocations or even broken bones. This calls for a serious need to try and prevent such accidents and it is very possible by using the right flooring on surfaces. The Health and Safety Executive strongly emphasizes that any sloppy areas on the docks should be fitted with non-slip coats. There are many products you can choose from but look for the one that has a very high resistance for maximum safety.

Ports 
Ports should have non-slip materials on the walking areas. Walking areas are more delicate and prone to accidents. In order to prevent any accidents, you should get non-slipping materials for your port. Some products have a very high skid resistance and they are the best to be used. Instead of using metal, wood or steel, anti-slip materials are the best solution for your port. You can get professionals who are experienced to help you renovate or even plan a port design.

Walkways 
The walkaways are at a higher risk of safety hazards if the wrong materials are used to construct them. They should be made in a way that they can resist heavier duties. They are used by a very large number of people beginning from passengers, contractors, ship captains, crew members and even some heavy equipment and loads. For such areas it is advisable to use non-slip material that can endure oiliness, wetness and any other bad condition. This is to give total marine safety and ensure there are no accidents and the walkways can be used fulltime.

Ramps and Gangways 
These are some of the vital areas because they are used to get to or from a ship or any water vessel. Materials such as GRP are perfect for the gangways for a much safer way to get to the ship. The material provides a strong grip and hardly wears out.

Ladders 
You should install rung covers on the ladders which will make it much easier to move within the ship or vessel. They give a longer service period than the tapes and save you the energy of replacing the tapes every now and then.

Pump Out and Re-fuelling 
These are marine parts with a high percentage of chemicals that are harmful. The materials used to construct these parts should be very durable and chemical resistant. Due to the oil from fuel it should also be non-slip and oil-resistant.

Other Ways of Preventing Slipping and Tripping 

To prevent oil related issues on the surfaces, you can use some plants that will help reduce contamination. Having storage bins for storage of lifting gear. The floors, walkways should be well maintained throughout. Put on the right footwear when performing a specific job and there should be enough light around marine areas and vessels.

This entry was posted in Tips. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *